EPDM Tapered Plugs (350 ° F) - Welcome to VIADON

Viadon's EPDM tapered plugs are a great all-purpose solution to wet spray paint, plating and anodizing masking requirements of blind or through holes where carbon can be introduced to tanks safely. Made from flexible EPDM rubber, these plugs can withstand temperatures up to 350 ° F / 177 ° C. EPDM tapered plugs are recommended for threaded and non-threaded holes, and are cost effective because they can be reused many times.

Try some FREE samples - Click here or call for more information! Toll FREE 866-534-3900

Part Number	Bottom D (Inches)	Top D (Inches)	Length (Inches)	Qty
ETP 99	0.031	0.125	0.625	1000
ETP100	0.062	0.125	0.625	1000
ETP101	0.062	0.187	0.625	1000
ETP101XL	0.062	0.187	0.75	1000
ETP102	0.125	0.25	0.75	1000
ETP102XL	0.125	0.25	1	1000
ETP103	0.187	0.343	0.625	1000
ETP103XL	0.187	0.343	1	1000
ETP104	0.25	0.375	0.75	100
ETP104XL	0.25	0.437	1	100
ETP105	0.25	0.375	0.5	100
ETP105XL	0.125	0.375	1.25	100
ETP500XL	0.125	0.5	2	100
ETP106	0.343	0.437	0.687	100
ETP000	0.343	0.468	0.718	100
ETP000XL	0.312	0.5	1	100
ETP107	0.375	0.562	1	100
ETP00	0.406	0.593	1	100
ETP108	0.437	0.625	0.812	100
ETP0	0.5	0.656	1	100
ETP1	0.562	0.75	1	100
ETP2	0.625	0.781	1	100
ETP3	0.718	0.937	1	100
ETP4	0.781	1	1	100

ETP5	0.906	1.062	1	100
ETP5.5	0.937	1.1	1	100
ETP6	1.031	1.25	1	100
ETP6.5	1.062	1.312	1	100
ETP7	1.187	1.437	1	50
ETP7.5	1.25	1.531	1	50
ETP8	1.312	1.625	1	50
ETP8.5	1.406	1.687	1	50
ETP9	1.468	1.75	1	50
ETP9.5	1.5	1.812	1	50
ETP10	1.625	1.969	1	50
ETP10.5	1.75	2.062	1	50
ETP11	1.875	2.203	1	10
ETP11.5	1.968	2.468	1	10
ETP12	2.125	2.5	1	10
ETP13	2.281	2.687	1	10
ETP13.5	2.437	2.968	1.375	10
ETP14	3	3.5	1.5	10
ETP15	3.25	4	1.5	10
ETP16	3.5	5	2	10