|
Viadon's silicone washer plugs are
highly recommended for powder coating, e-coating, plating and
anodizing masking where a grounded area must be left unfinished
on the substrate material. Each washer plug has two different
diameter tapered ends, allowing for dual use in multiple applications
(see diagram). Silicone washer plugs are capable of withstanding
600 ° F / 315 ° C and are economical because they are
reusable.
Try a FREE sample of some silicone washer
plugs to see if they're right for your next masking job - click
here or
call for more information! Toll FREE 866-534-3900
| |
Dimensions (Inches) |
| Part Number |
A |
B |
C |
D |
E |
F |
Qty. |
| SWP-M3 |
0.276 |
0.110 |
0.146 |
0.220 |
0.197 |
0.291 |
1000 |
| SWP-M4 |
0.354 |
0.142 |
0.185 |
0.283 |
0.197 |
0.370 |
1000 |
| SWP-M5 |
0.394 |
0.177 |
0.224 |
0.354 |
0.197 |
0.449 |
1000 |
| SWP-M6 |
0.492 |
0.209 |
0.264 |
0.417 |
0.197 |
0.528 |
500 |
| SWP-M8 |
0.669 |
0.280 |
0.343 |
0.559 |
0.197 |
0.685 |
500 |
| SWP-M10 |
0.827 |
0.378 |
0.421 |
0.756 |
0.197 |
0.843 |
250 |
| SWP-M12 |
0.945 |
0.429 |
0.500 |
0.858 |
0.197 |
1.000 |
250 |
| SWP380 |
0.250 |
0.128 |
0.096 |
0.504 |
0.197 |
0.386 |
1000 |
| SWP400 |
0.312 |
0.134 |
0.157 |
0.490 |
0.193 |
0.502 |
1000 |
| SWP405 |
0.319 |
0.124 |
0.252 |
0.385 |
0.217 |
0.511 |
1000 |
| SWP410 |
0.380 |
0.137 |
0.160 |
0.454 |
0.196 |
0.507 |
1000 |
| SWP412 |
0.375 |
0.198 |
0.274 |
0.492 |
0.198 |
0.500 |
500 |
| SWP415 |
0.502 |
0.127 |
0.186 |
0.381 |
0.202 |
0.497 |
500 |
| SWP420 |
0.505 |
0.244 |
0.257 |
0.509 |
0.193 |
0.516 |
500 |
| SWP440 |
0.625 |
0.127 |
0.256 |
0.358 |
0.191 |
0.506 |
500 |
|
|
|
